Solids control equipment in one of the indispensable mud sand pump equipment used in the process,Desander Hydrocyclone will encounter some of the problems of how we want to troubleshoot it?( Decanter Centrifuge Troubleshooting)
If worn, then Desander Hydrocyclone may be the following two questions:
The first packing (packing) seal leakage serious, packing heavy wear, surface wear sleeve.
Remedy: Remove the packing (packing), with a 90 ° bend thin wire inserted into the cartridge mechanical seals, Oilfield Drilling Mud Decanter Centrifuge is bushings moving wall, if the check of Oilfield Drilling Mud Decanter Centrifuge is to be too deep for-sleeve trench filler cap too tight will lead to severe wear fillers.
Second, DWM Solids Control of polyurethane seals wear serious cause leakage.
Remedy: Replace polyurethane seal (Normally, when the sand pump is running 3-6 months, Drilling Mud Cleaner should be replaced at once polyurethane seals and seal sleeve).
There must be an electrical engineer specializing in operation and maintenance. At present, only a few well-drilling operations abroad with the type of high-speed centrifuge, high performance requirements for drilling special wells, Drilling Mud Cleaner recommended speed centrifuges and centrifuge series of domestic high-speed process, the medium-speed centrifuge drilling into the post-processing of high-speed centrifuge for liquid storage, treatment by high-speed centrifuges, Drilling Fluids Desander used repeatedly into the circulatory system. Drilling Fluids Desander at this time to get a better purification of positive significance to improve the follow-up equipment of DWM Solids Control (drilling sand pump, drilling, downhole equipment, etc.) of the life-saving mud material consumption, improve ROP and other aspects in Dwm control. (Editor:Kosun Lily.Wang)
Kosun- Solid Control System Company
Tel.: +86 29 87304914/86-13891934239