June 2022 - Drilling Mud Decanter Centrifuge,Oilfield decanter centrifuge,industrial decanter centrifuge for sale

June 27, 2022June 27, 2022

KOSUN sent several centrifuges and vacuum degassers to Russia

Recently, KOSUN exported a batch of solids control equipment to Russia and sent them to the drilling project site in Russia. So far, KOSUN has sold several batches of solids control equipment to the Pan-Russian region. The pan-Russian market is one of the regions where KOSUN has cooperated for the longest time and has the largest market share. The main equipment supplied this time includes centrifuges, vacuum deaerators, screw pumps and other products.

In recent years, with the in-depth implementation of the “One Belt, One Road” policy, Sino-Russian relations have become more and more consolidated, and the commercial trade between the two sides has also developed rapidly. For this rapidly emerging overseas market, foreign trade people from all walks of life are high-spirited and open up the pan-Russian market through various channels. At the same time, KOSUN is also constantly striving to find better ways for more products to go abroad, insist on innovation, actively Adapt to market changes. Faced with the current unstable situation, our company has overcome all unfavorable factors and continuously and stably provided drilling mud solids control equipment to customers in the Pan-Russian region. The continuous ordering of customers also shows their trust and recognition of our company’s products. KOSUN never forgets its original intention, and strives to serve every customer well and meet all customer needs.

KOSUN is a manufacturer specializing in the production of drilling solids control equipment, mud zero discharge equipment, and oily sludge treatment equipment. We look forward to your inquiry!

KOSUN- China Solids Control Leader&Drilling Waste Management Expert
Email: sales2@adkosun.com
WhatsApp/Wechat:+86 18792396268
Contact person: Lily Wang
Online consulting:
http://www.kosun.com
http://www.kosuneco.com

June 27, 2022June 27, 2022

Centrifugal separation is the most popular measure to disposal oil-based mud

The traditional Oil-based Mud Treatment Technology is recycling and incineration.,simple processing and low cost. But this measures is higher demands on stratigraphy and the incineration can cause serious pollution to the environment, Not conducive to the construction of environmental conservation-minded society. At present, to meet emissions requirements, The mainly measures is through physical or chemical method to separate oil from the oil-based mud.

Incineration is that putting the cuttings waste of oil-based mud into a pyrolysis incineration device to achieve decomposed at high temperature and deep oxidation. In the process of incineration, consumed the oil in the cuttings and reduced the oil content greatly. But This method can produce a lot of smoke during burns, and it is also expensive to process.

Heat treatment method is that puting oil-based mud into the distillation column and rotaring evaporator to achieve full heating, then cooling collection until most of liquid oil and water evaporative. and discharge directly after the drill cuttings meet emission standards of oil content. But this method of processing costs is very higher. It is estimated that disposal drilling cuttings of one well need the total cost about $330,000.

Centrifugal separation is that using the principle of centrifugal to separate oil from oil-based mud. That is the specialized centrifugal separation equipment. It is vertical cuttings dryer. After centrifugal treatment, Water-based mud and composite mud: Water content 8-10%, oil-based mud: water content≤6%, OOC≤3%. and this equipment is the environmental and low cost treatment method. so it is the most popular measure to disposal oil-based mud.

June 23, 2022June 23, 2022

Brief introduction about the technology of Decanter Centrifuge

KOSUN is professional manufacturer of Decanter Centrifuge, and the following is a brief introduction about the technology of Decanter Centrifuge.

Compared with other separation machines, centrifuges can not only obtain solid phase with low moisture content and liquid phase with high purity, but also have the advantages of small volume, good sealing, continuous operation and automatic remote excavation. Therefore, centrifuges are widely used in chemical industry, petrochemical industry, petroleum refining, light T, medicine, food, textile, metallurgy, coal, beneficiation, shipbuilding, environmental protection, military industry and other departments, Such as coal powder recovery in wet coal mining; Purification and reuse of drilling mud for oil exploitation; Enrichment of uranium isotopes; Sludge thickening and dewatering of sewage treatment; Refining of petrochemical products; Antibacterial cable, extraction of pesticides; Manufacturing of milk, yeast, beer, fruit juice, granulated sugar, orange oil, animal Cypress oil, rice bran oil, starch and other foods; Fabric fiber dehydration; Centrifuges are required for the purification of lubricating oil and fuel oil. It can be seen that centrifuge has become widely used separation equipment in all sectors of the national economy.

The application functions of centrifuge mainly include dehydration, clarification, concentration, classification, separation and so on. Different centrifugal models must be selected according to different material characteristics and separation requirements, which lead to the problem of centrifuge selection. In the actual production process, due to the selection of appropriate separation equipment in some projects, the process is simple, the energy consumption is reduced, the product quality is improved, and good economic benefits are obtained; However, some centrifuges are improperly selected, which makes the production process unable to proceed normally, resulting in great economic losses. Therefore, in engineering design and technical transformation, the problem of how to correctly select centrifuges has been recognized and valued by the majority of engineering and technical personnel.

June 23, 2022June 23, 2022

Selection Decanter Centrifuge Model According Process

In the production process, there are different process requirements such as dehydration, clarification, concentration, classification and separation. The essence of dehydration and clarification is to separate the solid and liquid in the suspension from each other. Dehydration is to remove the liquid phase in the solid phase, and clarification is to remove the solid phase in the liquid phase.(Decanter Centrifuge)

Decanter Centrifuge-kosun — Decanter Centrifuge

A large amount of liquid phase, a small amount of solid phase, and the particle size of solid phase is very small (1o μ M) or amorphous mycelium, horizontal screw disc or tubular centrifuge can be selected. If the solid content is less than 1% and the particle size is less than 5rm, the tube type or zigzag type manual slag discharge can be used to separate vanadium. If solid content ≤ 3%, particle size < 5 μ m. Disc piston slag separator can be selected. The separation factor of tubular separator is high (f ≥ 1000, the separable particle size is about 0.5m. The finer particles have higher clarity, but the single processing capacity is small.

KOSUN is a professional manufacturer of Decanter Centrifuge for about 30 years, and we can supply capability of manufacturing decanter with bowl size from 220mm to 760mm.