Economic Configuration Decanter Centrifuge Operation and Maintenance

Economic Configuration Decanter Centrifuge

Economic configuration decanter centrifuge  is the final phase equipment for the drilling solid control system. Keeping the equipment up and running all the time without any downtime will go a long way in determining the overall operational performance of the drilling project.

While it is important to make sure the equipment is kept in good condition and well maintained, making sure that it is being operated in right manner is equally important. A qualified and well trained operator will know the intricacies of operating the equipment and even know to spot the signs to raise the alarm.

Economic Configuration Decanter Centrifuge
Economic Configuration Decanter Centrifuge

Decanter centrifuge is high cost equipment. It is imperative that it is maintained well, after all the economy of overall project will largely depend on such wise measures only.
Here we are outlining a few tips with respect to operation and maintenance of decanter centrifuges :
1. Preparing for start-up: Before starting the centrifuge check all electric control system and related components. Test the rotating belt manually for any glitch. Inspect the overall panel for any alarming signs.
2. Start the equipment: Most of the modern horizontal decanter centrifuge comes with touch panel now that have fairly user friendly command buttons. Using the touch panel, release relevant commands to bring the equipment to start.
3. Preventive procedure: Once you are done setting up the system, do not directly start feeding the system, let it run for 5 minutes, add water to clean the stuck or dried material.
4. Shutting down the equipment: Do not cut off the power all at once and bring the machine to a halt. Gradually slow down the feed and let the machine process the remaining material till it lasts. Repeat the washing and cleaning procedure.

Make sure that no manual handling is done while machine is operational as it may be very risky.

Leave a Reply

Your email address will not be published. Required fields are marked *