Vertical Centrifuge is very important machine for any oil or gas drillers. It enables them to perform drilling activities in a certain site. So, the operation and maintenance of a decanter centrifuge is a major issue for any drilling companies. In order to get the most of the benefit from a decanter centrifuge , it should be maintained and operated well. Here is a brief discussion about how decanter centrifuges should be operated and maintained.
The operating and maintaining process of a decanter centrifuge: The first thing that should be done to maintain a decanter centrifuge is to replace any hydraulic suction filter and replace hydraulic returns filter. It is a very important step for the oil and gas drillers.
As when the oil or gas drilling goes on both the hydraulic suction filter and the hydraulic returns filter undergo an extensive pressure. So, there is a huge possibility of both of them to be worn out. So in that sense, both of the filters must be checked regularly and be replaced when it is necessary. Another important thing that is required to do in order to maintain a decanter centrifuge is greasing the machine.
It is very important. As decanter centrifuge is basically used in a heavy working areas, the machine can easily be stuck or jammed off. In order to avoid that, greasing is very important. Oil lubricated gear box greasing and recirculating oil greasing are two very effective methods for greasing.
A very significant task for managing decanter centrifuges are adjusting speed sensor to it. It is very important just because adjusting a speed sensor enables drillers to control the differential speed. Beside these above mentioned activities replacing hydraulic motor sensor, bowl belt replacement, scroll belt replacement and regulating the weir plate are some of the steps that should be taken to maintain a decanter centrifuge.